Home / CentOS / How To Set Up the code-server Cloud IDE Platform on CentOS 7

How To Set Up the code-server Cloud IDE Platform on CentOS 7

The author selected the Free and Open Source Fund to receive a donation as part of the Write for DOnations program.

Introduction

With developer tools moving to the cloud, creation and adoption of cloud IDE (Integrated Development Environment) platforms is growing. Cloud IDEs allow for real-time collaboration between developer teams to work in a unified development environment that minimizes incompatibilities and enhances productivity. Accessible through web browsers, cloud IDEs are available from every type of modern device.

code-server is Microsoft Visual Studio Code running on a remote server and accessible directly from your browser. Visual Studio Code is a modern code editor with integrated Git support, a code debugger, smart autocompletion, and customizable and extensible features. This means that you can use various devices running different operating systems, and always have a consistent development environment on hand.

In this tutorial, you will set up the code-server cloud IDE platform on your CentOS 7 machine and expose it at your domain, secured with free Let’s Encrypt TLS certificates. In the end, you’ll have Microsoft Visual Studio Code running on your CentOS 7 server, available at your domain and protected with a password.

Prerequisites

  • A server running CentOS 7 with at least 2GB RAM, root access, and a sudo, non-root account. You can set this up by following this initial server setup guide.

  • Nginx installed on your server. For a guide on how to do this, see How To Install Nginx on CentOS 7.

  • Both of the following DNS records set up for your server. You can follow this introduction to DigitalOcean DNS for details on how to add them.

    • An A record with your-domain pointing to your server’s public IP address.
    • An A record with www.your-domain pointing to your server’s public IP address.
  • A fully registered domain name to host code-server, pointed to your server. This tutorial will use code-server.your-domain throughout. You can purchase a domain name on Namecheap, get one for free on Freenom, or use the domain registrar of your choice.

Step 1 — Installing code-server

In this section, you will set up code-server on your server. This entails downloading the latest version and creating a systemd service that will keep code-server always running in the background. You’ll also specify a restart policy for the service, so that code-server stays available after possible crashes or reboots.

You’ll store all data pertaining to code-server in a folder named ~/code-server. Create it by running the following command:

Navigate to it:

You’ll need to head over to the Github releases page of code-server and pick the latest Linux build (the file will contain ‘linux’ in its name). At the time of writing, the latest version was 2.1692. Download it using curl by running the following command:

  • curl -LO https://github.com/cdr/code-server/releases/download/2.1692-vsc1.39.2/code-server2.1692-vsc1.39.2-linux-x86_64.tar.gz

Then, unpack the archive by running:

  • tar -xzvf code-server2.1692-vsc1.39.2-linux-x86_64.tar.gz

You’ll get a folder named exactly as the original file you downloaded, which contains the code-server executable. Navigate to it:

  • cd code-server2.1692-vsc1.39.2-linux-x86_64

Copy the code-server executable to /usr/local/bin so you’ll be able to access it system wide by running the following command:

  • sudo cp code-server /usr/local/bin

Next, create a folder for code-server, where it will store user data:

  • sudo mkdir /var/lib/code-server

Now that you’ve downloaded code-server and made it available system-wide, you will create a systemd service to keep code-server running in the background at all times.

You’ll store the service configuration in a file named code-server.service, in the /usr/lib/systemd/system directory, where systemd stores its services. Create it using the vi editor:

  • sudo vi /usr/lib/systemd/system/code-server.service

Add the following lines:

/usr/lib/systemd/system/code-server.service

[Unit]
Description=code-server
After=nginx.service

[Service]
Type=simple
Environment=PASSWORD=your_password
ExecStart=/usr/local/bin/code-server --host 127.0.0.1 --user-data-dir /var/lib/code-server --auth password
Restart=always

[Install]
WantedBy=multi-user.target

Here you first specify the description of the service. Then, you state that the nginx service must be started before this one. After the [Unit] section, you define the type of the service (simple means that the process should be simply run) and provide the command that will be executed.

You also specify that the global code-server executable should be started with a few arguments specific to code-server. --host 127.0.0.1 binds it to localhost, so it’s only directly accessible from inside of your server. --user-data-dir /var/lib/code-server sets its user data directory, and --auth password specifies that it should authenticate visitors with a password, specified in the PASSWORD environment variable declared on the line above it.

Remember to replace your_password with your desired password. Type :wq and then ENTER to save and close the file.

The next line tells systemd to restart code-server in all malfunction events (for example, when it crashes or the process is killed). The [Install] section orders systemd to start this service when it becomes possible to log in to your server.

Start the code-server service by running the following command:

  • sudo systemctl start code-server

Check that it’s started correctly by observing its status:

  • sudo systemctl status code-server

You’ll see output similar to:

Output

● code-server.service - code-server Loaded: loaded (/usr/lib/systemd/system/code-server.service; disabled; vendor preset: disabled) Active: active (running) since Thu 2019-12-19 19:24:42 UTC; 5s ago Main PID: 1668 (code-server) CGroup: /system.slice/code-server.service ├─1668 /usr/local/bin/code-server --host 127.0.0.1 --user-data-dir /var/lib/code-server --auth password └─1679 /usr/local/bin/code-server --host 127.0.0.1 --user-data-dir /var/lib/code-server --auth password Dec 19 19:24:42 code-server-centos systemd[1]: Started code-server. Dec 19 19:24:44 code-server-centos code-server[1668]: info Server listening on http://127.0.0.1:8080 Dec 19 19:24:44 code-server-centos code-server[1668]: info - Using custom password for authentication Dec 19 19:24:44 code-server-centos code-server[1668]: info - Not serving HTTPS

To make code-server start automatically after a server reboot, enable its service by running the following command:

  • sudo systemctl enable code-server

In this step, you’ve downloaded code-server and made it available globally. Then, you’ve created a systemd service for it and enabled it, so code-server will start at every server boot. Next, you’ll expose it at your domain by configuring Nginx to serve as a reverse proxy between the visitor and code-server.

Step 2 — Exposing code-server at Your Domain

In this section, you will configure Nginx as a reverse proxy for code-server.

As you have learned in the Nginx prerequisite step, its site configuration files are stored under /etc/nginx/conf.d and will automatically be loaded when Nginx starts.

You’ll store the configuration for exposing code-server at your domain in a file named code-server.conf, under /etc/nginx/conf.d. Start off by creating it using your editor:

  • sudo vi /etc/nginx/conf.d/code-server.conf

Add the following lines:

/etc/nginx/conf.d/code-server.conf

server {
    listen 80;
    listen [::]:80;

    server_name code-server.your-domain;

    location / {
        proxy_pass http://localhost:8080/;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection upgrade;
        proxy_set_header Accept-Encoding gzip;
    }
}

Replace code-server.your-domain with your desired domain, then save and close the file.

In this file, you define that Nginx should listen to HTTP port 80. Then, you specify a server_name that tells Nginx for which domain to accept requests and apply this particular configuration.

In the next block, for the root location (/), you specify that requests should be passed back and forth to code-server running at localhost:8080. The next three lines (starting with proxy_set_header) order Nginx to carry over some HTTP request headers that are needed for correct functioning of WebSockets, which code-server extensively uses.

To test the validity of the configuration, run the following command:

You’ll see the following output:

Output

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful

For the configuration to take effect, you’ll need to restart Nginx:

  • sudo systemctl restart nginx

CentOS 7 comes with SELinux turned on, with a strict ruleset, which by default does not permit Nginx to connect to local TCP sockets. Nginx needs to do in order to serve as a reverse proxy for code-server. Run the following command to relax the rule permanently:

  • sudo setsebool httpd_can_network_connect 1 -P

Then, in your browser, navigate to the domain you used for code-server. You will see the code-server login prompt.

code-server login prompt

code-server is asking you for your password. Enter the one you set in the previous step and press Enter IDE. You’ll now enter code-server and immediately see its editor GUI.

code-server GUI

You now have your code-server installation accessible at your domain. In the next step, you’ll secure it by applying a free Let’s Encrypt TLS certificate.

Step 3 — Securing Your Domain

In this section, you will secure your domain using a Let’s Encrypt TLS certificate, which you’ll provision using Certbot.

To install the latest version of Certbot and its Nginx plugin, run the following command:

  • sudo yum install certbot python2-certbot-nginx

To request certificates for your domain, run the following command:

  • sudo certbot --nginx -d code-server.your-domain

In this command, you run certbot to request certificates for your domain—you pass the domain name with the -d parameter. The --nginx flag tells it to automatically change Nginx site configuration to support HTTPS. Remember to replace code-server.your-domain with your domain name.

If this is your first time running Certbot, you’ll be asked to provide an email address for urgent notices and to accept the EFF’s Terms of Service. Certbot will then request certificates for your domain from Let’s Encrypt. It will then ask you if you’d like to redirect all HTTP traffic to HTTPS:

Output

Please choose whether or not to redirect HTTP traffic to HTTPS, removing HTTP access. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1: No redirect - Make no further changes to the webserver configuration. 2: Redirect - Make all requests redirect to secure HTTPS access. Choose this for new sites, or if you're confident your site works on HTTPS. You can undo this change by editing your web server's configuration. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Select the appropriate number [1-2] then [enter] (press 'c' to cancel):

It is recommended to select the second option in order to maximize security. After you input your selection, press ENTER.

The output will be similar to this:

Output

IMPORTANT NOTES: - Congratulations! Your certificate and chain have been saved at: /etc/letsencrypt/live/code-server.your-domain/fullchain.pem Your key file has been saved at: /etc/letsencrypt/live/code-server.your-domain/privkey.pem Your cert will expire on ... To obtain a new or tweaked version of this certificate in the future, simply run certbot again with the "certonly" option. To non-interactively renew *all* of your certificates, run "certbot renew" - Your account credentials have been saved in your Certbot configuration directory at /etc/letsencrypt. You should make a secure backup of this folder now. This configuration directory will also contain certificates and private keys obtained by Certbot so making regular backups of this folder is ideal. - If you like Certbot, please consider supporting our work by: Donating to ISRG / Let's Encrypt: https://letsencrypt.org/donate Donating to EFF: https://eff.org/donate-le

This means that Certbot has sucessfully generated TLS certificates and applied them to the Nginx configuration for your domain. You can now reload your code-server domain in your browser and observe a padlock to the left of the site address, which means that your connection is properly secured.

Now you’ll make Certbot automatically renew the certificates before they expire. To run the renewal check daily, you’ll use cron, a standard system service for running periodic jobs. You direct cron by opening and editing a file called a crontab:

This command will open the default crontab, which is currently an empty text file. Add the following line, then save and close it:

crontab

. . .
15 3 * * * /usr/bin/certbot renew --quiet

15 3 * * * will run the following command at 3:15 am every day—you can adapt this to any time.

The renew command for Certbot will check all certificates installed on the system and update any that are set to expire in less than thirty days. --quiet tells Certbot not to output information or wait for user input.

cron will now run this command daily. All installed certificates will be automatically renewed and reloaded when they have thirty days or less before they expire.

Now that you have code-server accessible at your domain through a secured Nginx reverse proxy, you’re ready to review the user interface of code-server.

Step 4 — Using the code-server Interface

In this section, you’ll use some of the features of the code-server interface. Since code-server is Visual Studio Code running in the cloud, it has the same interface as the standalone desktop edition.

On the left-hand side of the IDE, there is a vertical row of six buttons opening the most commonly used features in a side panel known as the Activity Bar.

code-server GUI - Sidepanel

This bar is customizable so you can move these views to a different order or remove them from the bar. By default, the first button opens the general menu in a dropdown, while the second view opens the Explorer panel that provides tree-like navigation of the project’s structure. You can manage your folders and files here—creating, deleting, moving, and renaming them as necessary. The next view provides access to a search and replace functionality.

Following this, in the default order, is your view of the source control systems, like Git. Visual Studio code also supports other source control providers and you can find further instructions for source control work flows with the editor in this documentation.

Git pane with context-menu open

The debugger option on the Activity Bar provides all the common actions for debugging in the panel. Visual Studio Code comes with built-in support for the Node.js runtime debugger and any language that transpiles to Javascript. For other languages you can install extensions for the required debugger. You can save debugging configurations in the launch.json file.

Debugger View with launch.json open

The final view in the Activity Bar provides a menu to access available extensions on the Marketplace.

code-server GUI - Tabs

The central part of the GUI is your editor, which you can separate by tabs for your code editing. You can change your editing view to a grid system or to side-by-side files.

Editor Grid View

After creating a new file through the File menu, an empty file will open in a new tab, and once saved, the file’s name will be viewable in the Explorer side panel. Creating folders can be done by right clicking on the Explorer sidebar and clicking on New Folder. You can expand a folder by clicking on its name as well as dragging and dropping files and folders to upper parts of the hierarchy to move them to a new location.

code-server GUI - New Folder

You can gain access to a terminal by entering CTRL+SHIFT+`, or by clicking on Terminal in the upper menu dropdown, and selecting New Terminal. The terminal will open in a lower panel and its working directory will be set to the project’s workspace, which contains the files and folders shown in the Explorer side panel.

You’ve explored a high-level overview of the code-server interface and reviewed some of the most commonly used features.

Conclusion

You now have code-server, a versatile cloud IDE, installed on your CentOS 7 server, exposed at your domain and secured using Let’s Encrypt certificates. You can now work on projects individually, as well as in a team-collaboration setting. Running a cloud IDE frees resources on your local machine and allows you to scale the resources when needed. For further information, see the Visual Studio Code documentation for additional features and detailed instructions on other components of code-server.

If you would like to run code-server on your DigitalOcean Kubernetes cluster check out our tutorial on How To Set Up the code-server Cloud IDE Platform on DigitalOcean Kubernetes.

About freetutorial

Check Also

How To Acquire a Let’s Encrypt Certificate Using Ansible on Ubuntu 18.04

FacebookTwitter The author selected the Electronic Frontier Foundation to receive a donation as part of …

Leave a Reply

Your email address will not be published. Required fields are marked *